LAS-P

Lens Alignment and Inspection System

The LAS-P-VIS™ is a mid-sized, non-contact lens alignment and inspection station designed from the ground-up for precision lens centration and tilt measurements of single element, doublet, triplet and multi-element lens assemblies with radius ranging from +/- 1 mm to infinity (plano) and diameters from below 1 mm to 300 mm, including spherical, aspheric, cylindrical and parabolic surfaces. All this can be done with a single objective lens allowing for fast and easy measurement.

Overview

The core measurement technology is based on focused laser reflection (see LAS Technology). A single-mode optical fiber couples the external Laser Generation Module (LGM) to the on-tool vertically-mounted Optical Module (OM) which houses the focusing optics and large-format array camera(s). Software control of the LGM permits fast switching of wavelengths and optimization of the beam power, resulting in superior imaging of the reflected beam with sub-micron measurement precision. The design of the LGM permits up to two of three visible wavelengths (blue, green & red). 

The user friendly CalcuLens™ Assembly software is standard to all LAS™ models and enables computer automated measurement of the alignment errors of a single lens for rapid bottom-up assembly. Extending the measurement to multi-element lens assemblies requires the optional CalcuLens™ Inspection software thereby adding powerful inspection capability for the quality assurance of finished lens assemblies. The recent addition of CalcuSurf-1D™ USB lever probe and profiling software to the LAS™ family of products significantly aids the ease and precision of initial setup, resulting in improved utilization during frequent lens assembly changes. 

LAS-P-VIS

Applications

  • Centering of single lenses
  • Cementing lens doublets & triplets
  • Centering & bonding of multi-element lens assemblies
  • Alignment Inspection of multi-lens assemblies (requires CalcuLens Inspection)
  • Measurement of lens vertex height and air gaps (requires CalcuLens Vertex)
  • Measurement of lens Radius of Curvature (requires CalcuLens ROC)
  • Measurement of lens and assembly beam deviation (requires CalcuLens BD)
  • TIR profiling of rotationally symmetric housings and cells (requires CalcuSurf-1D)

System Characteristics

  • Mid-sized, solid granite construction on rigid passive vibration isolation stand
  • Measurement of small to medium diameter lenses and assemblies (ø ≤ 300 mm)
  • High-precision (< 50 nm runout) ø150 mm motorized & encoded rotary air bearing with integrated centration/tilt stage and vacuum through center
  • Precision, motorized & encoded vertical linear stage (travel ≤ 1500 mm)
  • High-power green (520 nm) laser, fiber coupled to Optical Module
  • 90 mm Working Distance (WD) objective lens with quick-attached thread for accessories
  • User-friendly CalcuLens Assembly software and data reporting functions conforming to ISO standards
  • Sub-micron centration accuracy

Available Options

  • Red (660 nm) or Blue (460 nm) laser
  • Extended vertical focusing travel 1250 mm – 1500 mm
  • High-precision (< 50 nm runout) ø200 mm motorized & encoded rotary air bearing with integrated centration/tilt stage and vacuum through center
  • Extended worktable diameters Ø200 mm – Ø300 mm 
  • 20 mm, 30 mm, 40 mm, 150 mm & 200 mm Working Distance objective lens adapters
  • Glue dispensing and UV cure stations
  • Reticle alignment accessory
  • CalcuLens Inspection software for measuring alignment of multi-lens assemblies
  • CalcuLens Vertex software for measurement of lens vertex height of tall lens assemblies and lens thickness and air space of shorter assemblies
  • CalcuLens ROC software for measurement of lens radius of curvature
  • CalcuLens BD software for measurement of lens boresight/beam deviation
  • CalcuSurf-1D precision USB lever probe with digital gage and real-time profiling software 
  • DMI-200 Low-coherence Distance Measurement Interferometer for center thickness and air space measurement of tall lens assemblies
  • 3D-SPM Surface Profiling Module for LAS
  • ROTOwand for vacuum lens pick-up & handling

LAS-P-VIS-IR

Applications

  • Centering of single infrared lenses
  • Cementing infrared lens doublets & triplets
  • Centering & bonding of multi-element infrared lens assemblies
  • Alignment Inspection of infrared multi-lens assemblies (requires CalcuLens™ Inspection)
  • Measurement of lens vertex height and air gaps (requires CalcuLens™ Vertex)
  • Measurement of lens Radius of Curvature (requires CalcuLens™ ROC)
  • Measurement of infrared lens and assembly beam deviation (requires CalcuLens™ BD)
  • TIR profiling of rotationally symmetric housings and cells (requires CalcuSurf-1D™)

System Characteristics

  • Mid-sized, solid granite construction on rigid passive vibration isolation stand
  • Measurement of small to medium diameter infrared lenses and assemblies (ø ≤ 300 mm)
  • High-precision (< 50 nm runout) ø150 mm motorized & encoded rotary air bearing with integrated centration/tilt stage and vacuum through center
  • Precision, motorized & encoded vertical linear stage (travel ≤ 1500 mm)
  • High-power green (520 nm) laser, fiber coupled to Optical Module
  • High-power MWIR (4.05 µm) quantum cascade laser, fiber coupled to Optical Module
  • 90 mm Working Distance (WD) broad-band (0.4 µm – 12 µm) objective lens with quick-attach thread for accessories
  • User-friendly CalcuLens™ Assembly software and data reporting functions conforming to ISO standards
  • Sub-micron centration accuracy in VIS, micron centration accuracy in IR

Available Options

  • Add Red (660 nm) or Blue (460 nm) laser
  • Replace MWIR with SWIR (1.55 µm) or LWIR (9.5 µm) laser 
  • High-precision (< 50 nm runout) ø200 mm motorized & encoded rotary air bearing with integrated centration/tilt stage and vacuum through center
  • Extended worktable diameters Ø200 mm – Ø300 mm 
  • 20 mm, 30 mm, 40 mm, 150 mm & 200 mm WD broad-band objective lens adapters
  • Glue dispensing and UV cure stations
  • Reticle alignment accessory
  • CalcuLens™ Inspection software for measuring alignment of multi-lens assemblies
  • CalcuLens™ Vertex software for measurement of lens vertex height of tall lens assemblies and lens thickness and air space of shorter assemblies
  • CalcuLens ROC software for measurement of lens radius of curvature
  • CalcuLens BD software for measurement of lens boresight/beam deviation
  • CalcuSurf-1D precision USB lever probe with digital gage and real-time profiling software 
  • DMI-200 Low-coherence Distance Measurement Interferometer for center thickness and air space measurement of tall lens assemblies
  • 3D-SPM Surface Profiling Module for LAS
  • ROTOwand for vacuum lens pick-up & handling

LAS-P-VIS-2xIR

Applications

  • Centering of single MWIR/LWIR lenses
  • Cementing MWIR/LWIR lens doublets & triplets
  • Centering & bonding of multi-element MWIR/LWIR lens assemblies
  • Alignment Inspection of infrared multi-lens assemblies (requires CalcuLens™ Inspection)
  • Measurement of lens vertex height and air gaps (requires CalcuLens™ Vertex)
  • Measurement of lens Radius of Curvature (requires CalcuLens™ ROC)
  • Measurement of infrared lens and assembly beam deviation (requires CalcuLens™ BD)
  • TIR profiling of rotationally symmetric housings and cells (requires CalcuSurf-1D™)

System Characteristics

  • Mid-sized, solid granite construction on rigid passive vibration isolation stand
  • Measurement of small to medium diameter infrared lenses and assemblies (ø ≤ 300 mm)
  • High-precision (< 50 nm runout) ø150 mm motorized & encoded rotary air bearing with integrated centration/tilt stage and vacuum through center
  • Precision, motorized & encoded vertical linear stage (travel ≤ 1500 mm)
  • High-power green (520 nm) laser, fiber coupled to Optical Module
  • High-power MWIR (4.05 µm) quantum cascade laser, fiber coupled to Optical Module
  • High-power LWIR (9.50 µm) quantum cascade laser, fiber coupled to Optical Module
  • 90 mm Working Distance (WD) broad-band (0.4 µm – 12 µm) objective lens with quick-attach thread for accessories
  • User-friendly CalcuLens™ Assembly software and data reporting functions conforming to ISO standards
  • Sub-micron centration accuracy in VIS, micron centration accuracy in IR

Available Options

  • Add Red (660 nm) or Blue (460 nm) laser 
  • High-precision (< 50 nm runout) ø200 mm motorized & encoded rotary air bearing with integrated centration/tilt stage and vacuum through center
  • Extended worktable diameters Ø200 mm – Ø300 mm 
  • 20 mm, 30 mm, 40 mm, 150 mm & 200 mm WD broad-band objective lens adapters
  • Glue dispensing and UV cure stations
  • Reticle alignment accessory
  • CalcuLens™ Inspection software for measuring alignment of multi-lens assemblies
  • CalcuLens™ Vertex software for measurement of lens vertex height of tall lens assemblies and lens thickness and air space of shorter assemblies
  • CalcuLens ROC software for measurement of lens radius of curvature
  • CalcuLens BD software for measurement of lens boresight/beam deviation
  • CalcuSurf-1D precision USB lever probe with digital gage and real-time profiling software 
  • DMI-200 Low-coherence Distance Measurement Interferometer for center thickness and air space measurement of tall lens assemblies
  • 3D-SPM Surface Profiling Module for LAS
  • ROTOwand for vacuum lens pick-up & handling

Connect

We’re standing by! How can we help you?

Request A Quote


EmailPhoneNo Preference

Get Support

Area of concern
SoftwareHardwareRobotUnknown

Is the tool under warranty?
UnknownYesNo

Is the tool operational?
YesNo

Are you the original owner?
UnknownYesNo